Composition for deep impregnation of covered wooden structures. Contains active biocides to protect wood from rot, prevents water infiltration. Application: For the treatment of wooden load-bearing components (beams and rafters) of the roof structure, floor joists, underground parts of poles and other covered structures not intended for decorative finishing. Can be successfully used to impregnate both new, intact and old, previously used wood for protection purposes. In cases when it is necessary to treat partially uncovered structures outdoors, including those exposed to sunlight (for example, when treating poles), TEKSTURDEKOR paint should be applied additionally.

Surface preparation: The wood to be treated must be dry (with a moisture content of less than 20%), free from dust and dirt, and with no fungal damage. Dirty surfaces must be mechanically treated with a suitable brush or scraper. Corrosion-protected metal parts must be used to secure the treated wooden structures. Use: Stir the composition before use. Apply with a brush to the maximum possible impregnation of the wood, or use the dipping method (not less than 2 times, with drying for not less than 1 hour between applications). The coating dries completely within 24 hours at +20 °C. The temperature must not be below +5 °C during application and drying. Maximum allowable air humidity is 80%. The ends of parts and surfaces intended for operation in high humidity conditions must be treated with great care. The optimal consumption of the product is 5.0–7.0 m²/l for sawn wood or 8.0–10.0 m²/l for planed wood. Drying time at 20°C and 50% air humidity is 1 hour. Use white spirit or VAITSOL solvent to clean the tools used for impregnation. The treated surface does not require additional protection or repainting for a long period of time.