Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RIALKID

Quick-drying, gloss, water-soluble alkyd enamel
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use water for diluting and tools cleaning
Drying time 6 h
Packaging 0.9 l, 2.7 l, 9.9 l (Base A and C)
Product can be stored only at temperatures above 5 ºC
Consumption 7 - 10 m²/l
Nearest store
Consumption calculator
Tinting
Description
Usage

RIALKID quick-drying, gloss, water-soluble alkyd enamel. Intended for painting wood and primed metal surfaces.  Base A can be used in white or tinted in light shades; Base C can be tinted in dark tones.

Use GF-021, NOVAKOR, NEOSPRINT PRIMER or RIATOP PRIMER primers for priming outdoor steel surfaces; use VL-02 or NEOSPRINT PRIMER primers for priming aluminium and galvanized surfaces. It is recommended to prime outdoor wood surfaces first with colourless TEKSTURDEKOR paint for wood protection. Stir the enamel thoroughly before use and dilute with water to working viscosity if necessary. Apply the enamel in 1–2 coats with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The air and paintable surface temperature must not be below +10 °C; air relative humidity – not higher than 70%. Drying time of each coat at +20 ºC is 6 hours, at +10 ºC – 8 hours. Drying time between applications at +20 ºC is not less than 8 hours, at +10 ºC – not less than 12 hours. Data on primer consumption for obtaining different coating thicknesses (excluding losses during application) are shown in the table. Use water to wash work tools. Store between +5 ºC and +30 ºC.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

RIALKID quick-drying, gloss, water-soluble alkyd enamel. Intended for painting wood and primed metal surfaces.  Base A can be used in white or tinted in light shades; Base C can be tinted in dark tones.

Usage

Use GF-021, NOVAKOR, NEOSPRINT PRIMER or RIATOP PRIMER primers for priming outdoor steel surfaces; use VL-02 or NEOSPRINT PRIMER primers for priming aluminium and galvanized surfaces. It is recommended to prime outdoor wood surfaces first with colourless TEKSTURDEKOR paint for wood protection. Stir the enamel thoroughly before use and dilute with water to working viscosity if necessary. Apply the enamel in 1–2 coats with a brush, roller, sprayer or airless spray equipment (with a nozzle diameter of 0.011″–0.017″). The air and paintable surface temperature must not be below +10 °C; air relative humidity – not higher than 70%. Drying time of each coat at +20 ºC is 6 hours, at +10 ºC – 8 hours. Drying time between applications at +20 ºC is not less than 8 hours, at +10 ºC – not less than 12 hours. Data on primer consumption for obtaining different coating thicknesses (excluding losses during application) are shown in the table. Use water to wash work tools. Store between +5 ºC and +30 ºC.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
RIALKID
7 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help