Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NITROBASE

Tinting nitrocellulose lacquer for priming
For interior use
The product can be applied by brush
The product can be applied with spray gun
The product can be tinted
Use appropriate solvent for diluting and tools cleaning
Drying time 0.5 h
Packaging 0.9 l, 2.7 l
Consumption 9 - 15 m²/l
Nearest store
Consumption calculator
Tinting
Description
Usage

NITROBASE tinting nitrocellulose lacquer for priming is intended for wooden surfaces of furniture and giving the desired shade before varnishing with the following varnishes manufactured by RILAK: NITROLAKA, DUOKRON. If other varnishes are to be used, a prior compatibility test is necessary. Can be used in a non-tinted form, as well as tinted in different shades. NITROBASE is tinted in the TEMACOLOR SCALA system in a fixed range of colours.

NITROBASE is applied in a thin coat on clean and dry wooden surfaces using a paint sprayer or brush. Prior local priming of branch and other resinous areas with untinted NITROBASE is recommended when tinting conifers. After priming, these areas should be sanded. If it is necessary to reduce the colour intensity, it is allowed to mix tinted and untinted NITROBASE. Use solvents 646, 647 or acetone to dilute the lacquer to the working viscosity and to wash the work tools. Drying time of lacquer at +20 ºC is 30 minutes. It is allowed to apply the top coat varnish 1 hour after applying NITROBASE (at a temperature of +20 °C). Lacquer consumption is 9–15 m2/l.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

NITROBASE tinting nitrocellulose lacquer for priming is intended for wooden surfaces of furniture and giving the desired shade before varnishing with the following varnishes manufactured by RILAK: NITROLAKA, DUOKRON. If other varnishes are to be used, a prior compatibility test is necessary. Can be used in a non-tinted form, as well as tinted in different shades. NITROBASE is tinted in the TEMACOLOR SCALA system in a fixed range of colours.

Usage

NITROBASE is applied in a thin coat on clean and dry wooden surfaces using a paint sprayer or brush. Prior local priming of branch and other resinous areas with untinted NITROBASE is recommended when tinting conifers. After priming, these areas should be sanded. If it is necessary to reduce the colour intensity, it is allowed to mix tinted and untinted NITROBASE. Use solvents 646, 647 or acetone to dilute the lacquer to the working viscosity and to wash the work tools. Drying time of lacquer at +20 ºC is 30 minutes. It is allowed to apply the top coat varnish 1 hour after applying NITROBASE (at a temperature of +20 °C). Lacquer consumption is 9–15 m2/l.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
NITROBASE
9 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help