Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

NEOKRON

Gloss parquet varnish
For interior use
The product can be applied by roller
The product can be applied by brush
Use water for diluting and tools cleaning
Drying time 4 h
Packaging 0.9 l, 2.7 l, 10 l
Product can be stored only at temperatures above 5 ºC
Consumption 8 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

One-component water-soluble gloss parquet varnish on an acrylate-polyurethane dispersion base is intended for varnishing parquet floors in both residential and intensively used public premises. Forms a wear-resistant coating. (Not to be used for varnishing parquet from certain varieties of beech and diamond pine.)

Stir the varnish thoroughly before use. The surface to be varnished must be clean, dry and free from sanding dust. Temperature of the air and surface to be varnished must not be below +10 ºC. Air relative humidity must be not higher than 80%. Avoid direct sunlight and draught during varnish application.

PRIMING:

Before applying the varnish, it is recommended to prime the parquet with a primer varnish. Neokron M itself can also be used for priming. Prime in 1 coat with a brush or roller or in 2–3 coats with a special steel blade for varnishing. After applying the priming coat, it should be sanded. Drying time before sanding is not less than 6 hours. Sanding is usually not necessary when priming with the steel blade for varnishing.

APPLICATION OF TOP COATS:

Apply the varnish with a brush or roller in 2–3 coats (excluding the priming coat). Prime in even coats, preventing local accumulation of varnish. Consumption per coat: 8–10 m²/l when applied with a roller or brush, 20–25 m²/l when applied with the special steel blade for varnishing. Drying time at +20 ºC is 4 hours. The curing time between applications must be not less than 5 hours. Drying time before beginning of free movement is 6 hours. The drying time increases at lower temperature. Full hardening of the varnish takes place within 1 week from the time of application. It is allowed to lay carpets, place furniture, wet clean, as well as apply protective waxes not earlier than after 1 week. Use water to clean work tools. Dried varnish residue is removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

One-component water-soluble gloss parquet varnish on an acrylate-polyurethane dispersion base is intended for varnishing parquet floors in both residential and intensively used public premises. Forms a wear-resistant coating. (Not to be used for varnishing parquet from certain varieties of beech and diamond pine.)

Usage

Stir the varnish thoroughly before use. The surface to be varnished must be clean, dry and free from sanding dust. Temperature of the air and surface to be varnished must not be below +10 ºC. Air relative humidity must be not higher than 80%. Avoid direct sunlight and draught during varnish application.

PRIMING:

Before applying the varnish, it is recommended to prime the parquet with a primer varnish. Neokron M itself can also be used for priming. Prime in 1 coat with a brush or roller or in 2–3 coats with a special steel blade for varnishing. After applying the priming coat, it should be sanded. Drying time before sanding is not less than 6 hours. Sanding is usually not necessary when priming with the steel blade for varnishing.

APPLICATION OF TOP COATS:

Apply the varnish with a brush or roller in 2–3 coats (excluding the priming coat). Prime in even coats, preventing local accumulation of varnish. Consumption per coat: 8–10 m²/l when applied with a roller or brush, 20–25 m²/l when applied with the special steel blade for varnishing. Drying time at +20 ºC is 4 hours. The curing time between applications must be not less than 5 hours. Drying time before beginning of free movement is 6 hours. The drying time increases at lower temperature. Full hardening of the varnish takes place within 1 week from the time of application. It is allowed to lay carpets, place furniture, wet clean, as well as apply protective waxes not earlier than after 1 week. Use water to clean work tools. Dried varnish residue is removed with acetone or solvent 646. Store in a tightly closed container at a temperature not lower than +5 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
NEOKRON
8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help