Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

KOLORPLAST

Tintable putty
For interior use
For exterior use
The product can be applied with spatula
The product can be tinted
Use water for diluting and tools cleaning
Drying time 3 h
Packaging 0.45 l
Product can be stored only at temperatures above 5 ºC
Nearest store
Consumption calculator
Tinting
Description
Usage

Water-soluble tintable putty on an acrylate polymer base. Characterized by low shrinkage and good sandability. Intended for filling of unevenness, cavities and other defects of parquet floors, as well as for filling of defects in various wooden surfaces indoors and outdoors. When filling wooden surfaces outdoors, it is necessary to cover the filled surface with a paint or varnish suitable for outdoor conditions. PENTAPRIM enamel, AKVATOP paint or VERSAKRIL varnish can be used for this purpose. The putty can be tinted in light colours in the RILAKOLOR system. After adding the colourants, the mixing time in the shaker must be not less than 3 minutes.

Manually mix the putty thoroughly again before use. Apply with a putty knife. Coat thickness is not more than 3 mm. Drying time at 20±2 °C is 3 hours. The final hardness is reached within 12–20 hours. Use water to wash tools after work. Store in a tightly closed container at a temperature not lower than +5 °C.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

Water-soluble tintable putty on an acrylate polymer base. Characterized by low shrinkage and good sandability. Intended for filling of unevenness, cavities and other defects of parquet floors, as well as for filling of defects in various wooden surfaces indoors and outdoors. When filling wooden surfaces outdoors, it is necessary to cover the filled surface with a paint or varnish suitable for outdoor conditions. PENTAPRIM enamel, AKVATOP paint or VERSAKRIL varnish can be used for this purpose. The putty can be tinted in light colours in the RILAKOLOR system. After adding the colourants, the mixing time in the shaker must be not less than 3 minutes.

Usage

Manually mix the putty thoroughly again before use. Apply with a putty knife. Coat thickness is not more than 3 mm. Drying time at 20±2 °C is 3 hours. The final hardness is reached within 12–20 hours. Use water to wash tools after work. Store in a tightly closed container at a temperature not lower than +5 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Consumption
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help