Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EPOPRIM

Two-component anti-corrosion epoxy primer
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use appropriate solvent for diluting and tools cleaning
Mix the components before use in the proportions indicated on the label
Drying time 4 h
Packaging 1.1 l (1.5 kg), 3.3 l (4.5 kg), 11 l (15 kg)
Consumption 6 - 12 m²/l
Nearest store
Consumption calculator
Description
Usage

EPOPRIM two-component anti-corrosion epoxy primer is intended for priming steel, aluminium and galvanized surfaces outdoors. It is recommended to use URETOP polyurethane enamel or EPOTOP 50 epoxy primer-enamel for the top coat. The use of alkyd and urethane alkyd enamels is not permitted. Thanks to the excellent adhesion, as well as the inclusion of effective anti-corrosion pigments in its composition, EPOPRIM primer provides long-term protection of the painted surface against corrosion. Indoors, as well as outdoors when painting objects that are not exposed to intense solar radiation (for example, under a canopy); can be used as a permanent coating with high hardness, abrasion resistance and chemical resistance to diluted alkali and weak acid solutions, as well as solvents, petrol, oils and other chemicals.

Surface preparation:

 Steel surfaces. Rust and dirt must be removed from the surface to be painted beforehand by abrasive metal treatment (sandblasting or shot blasting, manual machining) to a degree of purity of Sa 2½ or St 2. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean at least the loose rust layer and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, power grinders, etc. In this case, a possible reduction in the anti-corrosion effectiveness should be taken into account. Prior to painting, aluminium and galvanized surfaces should be degreased and lightly treated with fine-grained sandpaper or a weak abrasive blast, washed with 5% aqueous ammonia solution and dried.

Use:

Before use, stir the semi-finished primer product thoroughly and add the hardener: 18 parts by weight of hardener to 100 parts by weight of semi-finished product. After thorough mixing, the primer should be left for 45 minutes before use. If necessary, dilute the primer to working viscosity with solvents 646, 647, using the following amounts of solvents by weight: 5 to15% – when applied with a paint brush or roller; 10 to 20% – when applied with an air sprayer; 0 to 10% – when applied with airless spray equipment. Use the same solvents to clean the tools. Apply with a paint brush, roller, spray gun or airless spray equipment with a nozzle diameter of 0.011″ to 0.019″. The air and paintable surface temperature during painting must not be lower than +10 °C, relative air humidity – not higher than 85%. The drying time and permissible curing times until the application of the next coats of primer or enamel are given in Table 1. If the time to repainting is longer than specified, additional treatment of EPOPRIM surface with fine sandpaper is recommended to improve the adhesion of subsequent coats. The consumption of EPOPRIM primer is shown in Table 2. Taking into account the strong influence of the thickness of the primer film on the anti-corrosion properties of the coating, the recommended thickness of the primer coat after drying is not less than 50 μm.

Storage:

Store in a tightly sealed container at a temperature not exceeding +30 °C.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

EPOPRIM two-component anti-corrosion epoxy primer is intended for priming steel, aluminium and galvanized surfaces outdoors. It is recommended to use URETOP polyurethane enamel or EPOTOP 50 epoxy primer-enamel for the top coat. The use of alkyd and urethane alkyd enamels is not permitted. Thanks to the excellent adhesion, as well as the inclusion of effective anti-corrosion pigments in its composition, EPOPRIM primer provides long-term protection of the painted surface against corrosion. Indoors, as well as outdoors when painting objects that are not exposed to intense solar radiation (for example, under a canopy); can be used as a permanent coating with high hardness, abrasion resistance and chemical resistance to diluted alkali and weak acid solutions, as well as solvents, petrol, oils and other chemicals.

Usage

Surface preparation:

 Steel surfaces. Rust and dirt must be removed from the surface to be painted beforehand by abrasive metal treatment (sandblasting or shot blasting, manual machining) to a degree of purity of Sa 2½ or St 2. In cases where complete cleaning of the surface from corrosion products is not possible, it is necessary to clean at least the loose rust layer and perform the maximum possible surface treatment with abrasive tools such as sandpaper, steel brush, power grinders, etc. In this case, a possible reduction in the anti-corrosion effectiveness should be taken into account. Prior to painting, aluminium and galvanized surfaces should be degreased and lightly treated with fine-grained sandpaper or a weak abrasive blast, washed with 5% aqueous ammonia solution and dried.

Use:

Before use, stir the semi-finished primer product thoroughly and add the hardener: 18 parts by weight of hardener to 100 parts by weight of semi-finished product. After thorough mixing, the primer should be left for 45 minutes before use. If necessary, dilute the primer to working viscosity with solvents 646, 647, using the following amounts of solvents by weight: 5 to15% – when applied with a paint brush or roller; 10 to 20% – when applied with an air sprayer; 0 to 10% – when applied with airless spray equipment. Use the same solvents to clean the tools. Apply with a paint brush, roller, spray gun or airless spray equipment with a nozzle diameter of 0.011″ to 0.019″. The air and paintable surface temperature during painting must not be lower than +10 °C, relative air humidity – not higher than 85%. The drying time and permissible curing times until the application of the next coats of primer or enamel are given in Table 1. If the time to repainting is longer than specified, additional treatment of EPOPRIM surface with fine sandpaper is recommended to improve the adhesion of subsequent coats. The consumption of EPOPRIM primer is shown in Table 2. Taking into account the strong influence of the thickness of the primer film on the anti-corrosion properties of the coating, the recommended thickness of the primer coat after drying is not less than 50 μm.

Storage:

Store in a tightly sealed container at a temperature not exceeding +30 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
EPOPRIM
6 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help