Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DUOKRON glossy

Glossy two-component parquet varnish with acid hardener
For interior use
The product can be applied by roller
The product can be applied by brush
Use appropriate solvent for diluting and tools cleaning
Mix the components before use in the proportions indicated on the label
Drying time 2 h
Packaging 2.7 l
Consumption 8 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

The varnish is intended for parquet floors indoors as well as for wooden surfaces of furniture.

Stir the semi-finished varnish product thoroughly before use, then mix it with the hardener in a glass or ceramic container in the following ratio: add 8 parts by weight of hardener to 100 parts by weight of the semi-finished product. Mix thoroughly and wait for 30 minutes. When applying with a brush or roller, the varnish may be diluted with solvent 646 or 647 up to 5% by volume. Application of varnish by spraying is allowed only in designated painting sections of furniture factories. Apply the varnish on a clean, dry surface in 2 to 3 coats. The varnish must not be applied on a wooden surface with a moisture content of more than 10%.
The absolute air humidity must not exceed 65% during application and drying of the varnish. Dry each coat for 2 hours at 20 °C. The varnish coating reaches maximum hardness after 5 to 7 days. Curing time until the next coat is applied: not less than 3 hours. Particular care should be taken when varnishing the surfaces of conifers with a high resin content (for example, pine), because the effect of the solvents contained in the varnish may result in extraction of the resin from the wood into the varnish layer, as a result of which small local film surface defects may appear. If this has happened, the defective areas should be sanded with fine sandpaper and another thin coat of varnish should be applied no sooner than after 24 hours. Varnish consumption: 8 to 10 m2/l for one coat. After adding the hardener, the varnish must be used up within 8 hours. The varnish and hardener must be stored in tightly sealed containers, protected from direct sunlight and moisture.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

The varnish is intended for parquet floors indoors as well as for wooden surfaces of furniture.

Usage

Stir the semi-finished varnish product thoroughly before use, then mix it with the hardener in a glass or ceramic container in the following ratio: add 8 parts by weight of hardener to 100 parts by weight of the semi-finished product. Mix thoroughly and wait for 30 minutes. When applying with a brush or roller, the varnish may be diluted with solvent 646 or 647 up to 5% by volume. Application of varnish by spraying is allowed only in designated painting sections of furniture factories. Apply the varnish on a clean, dry surface in 2 to 3 coats. The varnish must not be applied on a wooden surface with a moisture content of more than 10%.
The absolute air humidity must not exceed 65% during application and drying of the varnish. Dry each coat for 2 hours at 20 °C. The varnish coating reaches maximum hardness after 5 to 7 days. Curing time until the next coat is applied: not less than 3 hours. Particular care should be taken when varnishing the surfaces of conifers with a high resin content (for example, pine), because the effect of the solvents contained in the varnish may result in extraction of the resin from the wood into the varnish layer, as a result of which small local film surface defects may appear. If this has happened, the defective areas should be sanded with fine sandpaper and another thin coat of varnish should be applied no sooner than after 24 hours. Varnish consumption: 8 to 10 m2/l for one coat. After adding the hardener, the varnish must be used up within 8 hours. The varnish and hardener must be stored in tightly sealed containers, protected from direct sunlight and moisture.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
DUOKRON glossy
8 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help