Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

AVANT KONTAKT

Primer with coarse-grained quartz filler
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
Use water for diluting and tools cleaning
Drying time 2 h
Packaging 1.5 l, 7.5 l, 15 l
Product can be stored only at temperatures above 5 ºC
Consumption 200 - 400 m²/l
Nearest store
Consumption calculator
Description
Usage

AVANT KONTAKT, primer with coarse-grained quartz filler, is intended for priming smooth surfaces (such as concrete, clinker bricks, ceramic tiles, etc.) in order to improve adhesion of various plaster compositions as well as tile adhesive. Can be used both indoors and outdoors.

Stir AVANT KONTAKT thoroughly before use. Apply with a ceiling/wall (maklovitsa) brush or roller on preliminary prepared clean and dry surfaces, if the surface and air temperature is not lower than +10 °C and relative air humidity is not higher than 85%. Primer consumption: 200 to 400 g/m². Drying time: 2 hours at +20 °C. Plaster or adhesive can be applied to primed surfaces not earlier than after 12 hours at +20 °C or after 24 hours at +10 °C. Wash work tools with warm water and soap after finishing work. Store in a tightly closed container at a temperature above 0 °C.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

AVANT KONTAKT, primer with coarse-grained quartz filler, is intended for priming smooth surfaces (such as concrete, clinker bricks, ceramic tiles, etc.) in order to improve adhesion of various plaster compositions as well as tile adhesive. Can be used both indoors and outdoors.

Usage

Stir AVANT KONTAKT thoroughly before use. Apply with a ceiling/wall (maklovitsa) brush or roller on preliminary prepared clean and dry surfaces, if the surface and air temperature is not lower than +10 °C and relative air humidity is not higher than 85%. Primer consumption: 200 to 400 g/m². Drying time: 2 hours at +20 °C. Plaster or adhesive can be applied to primed surfaces not earlier than after 12 hours at +20 °C or after 24 hours at +10 °C. Wash work tools with warm water and soap after finishing work. Store in a tightly closed container at a temperature above 0 °C.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
AVANT KONTAKT
200 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help