Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ALMIOKS

Decorative alkyd enamel
For interior use
For exterior use
The product can be applied by roller
The product can be applied by brush
The product can be applied with spray gun
Use appropriate solvent for diluting and tools cleaning
Drying time 12 h
Packaging 0.45 l, 0.9 l
Consumption 6 - 10 m²/l
Nearest store
Consumption calculator
Description
Usage

ALMIOKS is a decorative alkyd enamel that forms a dark grey silver coating and structurally resembles the surface of aged wrought iron. Intended for decorative finishing of pre-primed metal surfaces outdoors and indoors. Especially recommended for decorative finishing of steel gates, gratings, fences, railings, poles, etc.

Prior to painting, steel surfaces must be primed with one of the following primers:  GF-021, NOVAKOR, RIATOP PRIMER, NEOSPRINT PRIMER. Stir ALMIOKS thoroughly before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent, adding 0 to 4% by volume; apply with a paint brush or roller. Use the same solvents to clean the work tools. Application of ALMIOKS by spraying is allowed only in designated painting facilities of industrial plants and workshops. Apply on primed surfaces with a spray gun, paint brush or roller in 1 to 2 coats, if the air temperature is not lower than +5 ºC and relative air humidity is not higher than 85%. Enamel consumption: 6 to 10 m²/l for one coat. Drying time at 20 ± 2 °C: not more than 12 hours.

Need help?
info@rilak.lt
+371 67 458 776
Question about the product
Description

ALMIOKS is a decorative alkyd enamel that forms a dark grey silver coating and structurally resembles the surface of aged wrought iron. Intended for decorative finishing of pre-primed metal surfaces outdoors and indoors. Especially recommended for decorative finishing of steel gates, gratings, fences, railings, poles, etc.

Usage

Prior to painting, steel surfaces must be primed with one of the following primers:  GF-021, NOVAKOR, RIATOP PRIMER, NEOSPRINT PRIMER. Stir ALMIOKS thoroughly before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent, adding 0 to 4% by volume; apply with a paint brush or roller. Use the same solvents to clean the work tools. Application of ALMIOKS by spraying is allowed only in designated painting facilities of industrial plants and workshops. Apply on primed surfaces with a spray gun, paint brush or roller in 1 to 2 coats, if the air temperature is not lower than +5 ºC and relative air humidity is not higher than 85%. Enamel consumption: 6 to 10 m²/l for one coat. Drying time at 20 ± 2 °C: not more than 12 hours.

Question about the product
Patēriņa kalkulators

Contact us

We will be happy to help

Consumption calculator

Find out how much of the product You will need.

Produkts:
Consumption
ALMIOKS
6 m²/l
Surface area
Based on our calculations You will need approximately:
0
liters of product for one coating

SIA Rīgas laku un krāsu rūpnīca

Daugavgrīvas iela 63/65, Rīga, LV-1007

Reģistrācijas Nr.: 40003284444

PVN Nr.: LV40003284444

Banka: A/S Swedbank

Konts: LV23HABA0019308047593

Bankas kods: HABALV22

Contact us

We will be happy to help