ALMIOKS is a decorative alkyd enamel that forms a dark grey silver coating and structurally resembles the surface of aged wrought iron. Intended for decorative finishing of pre-primed metal surfaces outdoors and indoors. Especially recommended for decorative finishing of steel gates, gratings, fences, railings, poles, etc.
Prior to painting, steel surfaces must be primed with one of the following primers: GF-021, NOVAKOR, RIATOP PRIMER, NEOSPRINT PRIMER. Stir ALMIOKS thoroughly before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent, adding 0 to 4% by volume; apply with a paint brush or roller. Use the same solvents to clean the work tools. Application of ALMIOKS by spraying is allowed only in designated painting facilities of industrial plants and workshops. Apply on primed surfaces with a spray gun, paint brush or roller in 1 to 2 coats, if the air temperature is not lower than +5 ºC and relative air humidity is not higher than 85%. Enamel consumption: 6 to 10 m²/l for one coat. Drying time at 20 ± 2 °C: not more than 12 hours.
ALMIOKS is a decorative alkyd enamel that forms a dark grey silver coating and structurally resembles the surface of aged wrought iron. Intended for decorative finishing of pre-primed metal surfaces outdoors and indoors. Especially recommended for decorative finishing of steel gates, gratings, fences, railings, poles, etc.
Prior to painting, steel surfaces must be primed with one of the following primers: GF-021, NOVAKOR, RIATOP PRIMER, NEOSPRINT PRIMER. Stir ALMIOKS thoroughly before use. If necessary, dilute to working viscosity with white spirit or VAITSOL solvent, adding 0 to 4% by volume; apply with a paint brush or roller. Use the same solvents to clean the work tools. Application of ALMIOKS by spraying is allowed only in designated painting facilities of industrial plants and workshops. Apply on primed surfaces with a spray gun, paint brush or roller in 1 to 2 coats, if the air temperature is not lower than +5 ºC and relative air humidity is not higher than 85%. Enamel consumption: 6 to 10 m²/l for one coat. Drying time at 20 ± 2 °C: not more than 12 hours.
Find out how much of the product You will need.
Daugavgrīvas iela 63/65, Rīga, LV-1007
Reģistrācijas Nr.: 40003284444
PVN Nr.: LV40003284444
Banka: A/S Swedbank
Konts: LV23HABA0019308047593
Bankas kods: HABALV22
